| |
GPX-4500 
A creation worth it’s weight in gold!
Stronger and more versatile than ever before, the Minelab GPX-4500 is the ultimate in cutting edge gold finding technology offering features and performance levels that other manufacturers are yet to match. Incorporating new Smart Electronic Timing Alignment (SETA) technology alongside Minelab’s existing Multi Period Sensing (MPS) and Dual Voltage Technology (DVT), it is quieter and more immune to interference than earlier models, making it a real pleasure to use.
No matter if you've never picked up a detector before, the GPX-4500 offers a number of pre-programmed search modes allowing you to start detecting like an expert right away! Quieter threshold, louder target signals, improved discrimination, and more versatility, the GPX-4500 is the gold detector that gives the best results, bar none.
The improved discrimination, including the Iron Reject function, combined with the specially programmed Hi Trash search mode makes areas of extreme junk well worth a search. Also great for the specialist Relic and Jewellery hunter who demands the best, and wants to recover smaller and deeper targets invisible to most treasure detectors.
Offering all of the great features and high performance you have come to expect from a Minelab detector, the GPX-4500 is the latest in nugget detecting technology for the professional prospector or someone that simply wants the best.
Features:
- SETA, DVT & MPS Technology delivers to you the most technologically advanced detector yet making small hard to hear nuggets more obvious.
- New timings so the GPX-4500 is even more versatile. In addition to the four timings found on the previous model the GPX-4500 introduces two new timings: Enhance and Sharp. The new Enhance timing is a powerful feature, similar to the Sensitive Smooth timing, but provides an improvement in the depth and signal response on small and large targets alike. The Sharp timing is more suited to quieter soils and can also be used as an aid to pin-point faint signals.
- Six pre-programmed search modes for easy switch on and go detecting. In addition to General and Deep search are Hi Mineral; Hi Trash; Patch and Test A modes. All six search modes can also be modified with your favourite settings and renamed.
- Ground balance off for neutral soils in addition to normal and specific ground balance options on previous model. In GB Off the ground balance circuit is by-passed to give extra deep detection. This is a useful feature in very benign low mineralised, or salt saturated soils. This setting will also work well for treasure or relic hunters in loam or sandy soils.
- Back light so you can read the LCD menu in any light, day or night. The back light has adjustable time-out to preserve battery life.
- Stabilizer for the smoothest threshold. The stabilizer function is a fine tuner that gives the operator full control over the threshold stability. In quiet conditions, increase the stabilizer control and faint target signals will be more obvious. Turning it down will provide you with a smoother threshold, improving your ability to pick up the faintest of signals
- Target Volume in addition to the Volume Limit control, which prevents signals from being too loud, the new Target Volume allows you to increase the strength of softer target signals. This is useful for very windy conditions, for people suffering from hearing loss, and to adjust the audio volume when using external speakers. The Target Volume can also be used as an audio boost in mild soils, and can be used to reduce or smooth out ground noise signals in highly mineralised soils. This is a powerful feature, and will work in conjunction with the Stabilizer control, to give you the ultimate in fine-tuning ability.
- Improved discrimination giving you access to the worst of trashy ground. The Iron Reject function allows the operator to set the desired level of discrimination, from cautious to aggressive. This will open up detecting in areas that have previously been passed over due to a high presence of ferrous junk.
- Built-in amplifier so you can hear soft target signals from deeper nuggets, more easily. The newly designed Li-lon battery pack now has an audio amplifier built in, allowing you to use an external speaker, without the need for any external booster. The design of the amplifier and the use of high-quality low noise components ensures the signal response is clear and crisp, without the added background hum of some boosters.
[ Top ] |
SDV2200V2

High performance in a rock solid package
Minelab's SD2200v2 takes your detecting up a notch featuring Multi-Period Sensing (MPS) technology, the exclusive invention of Minelab, to give you depth, sensitivity and reliability. The SD2200v2 combines automatic ground balance, discrimination and automatic tuning to make it one of the world's most sophisticated and powerful gold detectors. The boost amplifier and tone control allow you to customize your detector, making hard to hear sounds clear and defined whilst the discrimination function rejects strong signals from ferrous junk, allowing more time detecting and less time digging unwanted targets.
With an excellent balance of features, performance and price, the SD2200v2 offers you more bang for your buck with its surprisingly affordable price.
Features:
- MPS technology means you can locate targets at far greater depth than conventional VLF detectors, while small targets can still be found in difficult grounds, and aids in the accuracy of ground balance limiting false signals.
- Discrimination (ferrous) function rejects strong signals from ferrous junk, allowing more time detecting and less time digging unwanted targets.
- The automatic ground tracking makes detecting in all grounds easy and effortless, as the detector continually tests the ground mineralisation and will automatically adjust the ground balance as required, ensuring maximum depth and minimal ground noise without you having to stop and re-adjust settings.
- Automatic ground balance.
- Audio boost and tone control allow you to customize your detector, making hard to hear sounds, clear and defined.
- 6V Gel-cell battery giving you up to 2 days running time.
- Mains and car chargers so you can recharge anytime, anywhere.
- Also includes headphones as standard so you don’t miss any targets.
[ Top ] |
Eureka Gold

Take the guesswork out of detecting…
The Eureka Gold is one of the world’s most versatile gold nugget detectors. Operating with Minelab's exclusive triple frequency technology the Eureka Gold makes prospecting easier than ever before. The Eureka Gold gives you 6.4kHz for maximum depth, 20kHz for general detecting and the super sensitive 60kHz to find the smallest gold nuggets that others are missing.
Featuring Minelab's "Accu-Trak" Digital Ground Balance with switchable two speed recovery, combined with new microprocessor controlled discrimination circuitry, it takes the guess work out of detecting so YOU will find more gold, more often. Hot Rocks are no problem for the Eureka Gold; it will punch through highly mineralized soil with ease.
The Eureka Gold is for those of you who want solid performance in a mid-priced detector.
Features:
- VLF technology gives you an easy ‘switch on and go’ detector featuring Minelab’s exclusive triple frequency technology – simply switch between frequencies of 6.4, 20 and 60kHz to target different depths.
- “ACCU-TRAK” digital ground balance with two speed options for increased depth.
- Iron rejection in each frequency.
- Variable ferrous discrimination control gives you the ultimate in iron rejection.
- Minelab’s 10” Double D ‘easysweep’ elliptical coil system for wider ground coverage.
- State of the art NiMH rechargeable battery system.
- Extra comfort with an ergonomic balanced shaft system.
|
|
[ Top ]
|
X-Terra 705  The ultimate in all-purpose detecting
The X-TERRA 705 offers the ultimate detecting experience. Capitalising on the versatility of the range, the X-TERRA 705 can be used for gold prospecting as well as for coin & treasure hunting, simply by switching between available pre-programmed modes. Thanks to Coin & Treasure and Gold Prospecting Modes you get a gold detector plus coin, treasure & relic detector all in one!
Across diverse detecting conditions and in the toughest environments, the X-TERRA 705 delivers optimal performance with ease. An all-purpose detector capable of all types of detecting, from coin & treasure to relic, beach and gold prospecting. Performance and features driven, the versatility of this detector makes it without question, the leading detector in this category.
The specialised Prospecting Mode has improved sensitivity making the detector more sensitive to small target signals. The Prospecting Mode can be used in highly mineralised, 'difficult' areas. The high frequency Double-D coils offer advantages, as they are adept at handling these conditions. The Prospecting Mode is ideal not only when searching for gold nuggets but also for small relics and some types of jewellery.
Packed with features and offering you the ultimate in flexibility, the X-TERRA 705 is a superior detector that will find you more, more often!
Perfect for when you just want to have it all.
Please note: depending upon your geographical region the X-TERRA 705 comes with the option of either a dual coil or Pro Pack (consisting of an additional coil and bag).
Features:
- Minelab’s proprietary "True Digital" VFLEX technology, the new class of single frequency detectors allowing you to change the frequency simply by changing coils.
- Compatible with low, mid and high frequency waterproof coils - all 7 X-TERRA accessory coils can be used with the X-TERRA 705.
- Automatic/Manual Ground Balancing, Tracking and now with Tracking Ground Balance Offset adjustment. This creates a performance advantage in certain areas such as wet/dry sand transition and hot rock locations, by setting the balance slightly positive or negative.
- Four preset detecting patterns, that can also be customised plus All-Metal mode.
- Adjustable Iron Mask – designed for Prospecting Mode. This feature allows you to find desirable targets lying close to ferrous metals.
- Threshold tone for more accurate target ID interpretation.
- Two Pinpoint Modes: Auto and Sizing. With the new Sizing feature, the user gets valuable information on target characteristics including shape and size with variable tone and graphical indicator.
- Target ID stability – precise, solid responsiveness in high-trash areas enabling you to efficiently and effectively search sites with a high concentration of junk.
- Positive transflective LCD display providing a back light only in dim light conditions enabling better screen visibility in poor lighting whilst saving battery charge in well lit conditions.
- Depth indicators, update continuously, even in Pinpoint mode.
- Runs on just 4 x AA batteries.
- Ultra lightweight, balanced design (only 1.3kgs) so you can enjoy detecting for longer periods.
[ Top ] |
|
|